deleting virus in regedit

Run->type regedit
firts thing you want to do on the registry editer befor you make any changes
click my computer in registry editer,
click file->export->type a name registry bakup->and save it where you want in your computer
click on the pluse shign HKEY_LOCAL_MACHINE->SOFTWARE->CLASSES->CLSID 'hilight clisid'

there wil come such long group of number
now we are going to find what we are want
click edit->click find-> now we want to type first few letters of we are searching file
->70d17a5f->click "find next"
if it is finished it will show a window click ok
scrol down and search wich one is hilght or showing opend folder
now we are find the virus right click and click delet

this is work with only some computers

If you like this comment it send my blog to your friend

How To Remove Virus Without Using Antivirus Program ?

step1:start your command prompt

step2:select the virus affected drive
in this case drive dive c:
type "c:"then press enter
to see the content on drive c:
you can type "dir" command

step3:Type "attrib -s -h *.* /s /d" then press enter

If you like this comment it and send my blog to your friend

How To Manually Remove Trojan?

If you have identified the particular program that is part of the malware, and you want to remove it, please follow these steps.

Download and extract the Autoruns program by Sysinternals to C:\Autoruns


Reboot into Safe Mode so that the malware is not started when you are doing these steps. Many malware monitor the keys that allow them to start and if they notice they have been removed, will automatically replace that startup key. For this reason booting into safe mode allows us to get past that defense in most cases.


Navigate to the C:\Autoruns folder you created in Step 1 and double-click on autoruns.exe.


When the program starts, click on the Options menu and enable the following options by clicking on them. This will place a checkmark next to each of these options.


Include empty locations


Verify Code Signatures


Hide Signed Microsoft Entries


Then press the F5 key on your keyboard to refresh the startups list using these new settings.


The program shows information about your startup entries in 8 different tabs. For the most part, the filename you are looking for will be found under the Logon or the Services tabs, but you should check all the other tabs to make sure they are not loading elsewhere as well. Click on each tab and look through the list for the filename that you want to remove. The filename will be found under the Image Path column. There may be more than one entry associated with the same file as it is common for malware to create multiple startup entries. It is important to note that many malware programs disguise themselves by using the same filenames as valid Microsoft files. it is therefore important to know exactly which file, and the folder they are in, that you want to remove.


Once you find the entry that is associated with the malware, you want to delete that entry so it will not start again on the next reboot. To do that right click on the entry and select delete. This startup entry will now be removed from the Registry.


Now that we made it so it will not start on boot up, you should delete the file using My Computer or Windows Explorer. If you can not see the file, it may be hidden.


When you are finished removing the malware entries from the Registry and deleting the files, reboot into normal mode as you will now be clean from the infection.

If you like this please comment it and tell about my blog

short cut to clean your computer

start->run->type in "cleanmgr" click ok
that will bring up a window list the drive e+g:put the c Drive click ok
it will scane your drive c
select what you want to clean
and click ok it will clean


If you like this web site please comment it and tell about my blog to your friends

YOU CAN CHECK YOUR NOKIA MOBILE QUALITY

=>Type *#06# in your mobile
in imei

if 7&8th digit are
02 or 20 then bad quality
08 or 80 germany not bad quality
01 or 10 finland good quality
oo ogrinal quality
13 very bad quality

If you like this comment it, tell about my blog to your friends

Play FM without Headphones

Plz Note :This Is For MOTOROLA ONLY!!!
Just Dial

*#**372#
or
*#**376#

Enjoy !!!

If you like this comment it and tell about my blog to your friends

Shutdown computer with cellphone

Shutdown Computer with a Cell Phone Using this method, a user can shutdown, restart, hibernate, etc. his or her computer, just by sending an email from his or her phone. To do this, all you will need is Microsoft Outlook...



which should come with Microsoft Office, which most people have. This will need to be on the computer wish you wish to shutdown. So, this is how you do this: 1. First, you need the batch files to perform the Shutdown, Hibernate etc. You can write them down yourselves or can download them from here. 2. Extract them to your C:\ drive so the path to the shutdown batch file is C:\sms_functions\shutdown.bat (Important this is a must the path must be exact) or you can modify the rule once you import it to point to the new destination, it's your call. 3. Open up Microsoft Outlook. Make sure that you have already configured it for your email.Now we will need to make it so that Outlook checks your inbox about every minute (1 minute for testing time can be increased if a delayed shutdown is desired). You can do this by going to Tools: Options. 4. Then click the Mail Setup tab, and afterwards, the Send/Receive button. 5. Make sure that the Schedule an automatic send/receive every... box is checked, and set the number of minutes to 1. Now you may close all of these dialog boxes. 6. Now go to Tools: Rules and Alerts... Next click the options button in the upper right hand corner and press the Import Rules button. 7. Now select the shutdown.rwz file that was found in the zip file named sms_functions that you downloaded. 8. Now, when you send a message from your phone to your e-mail address with the subject smsshutdown%%, your computer will shutdown. You can also make your own rule, so that you can use your own batch file, and may specify the phrase you want to trigger the action

If you like this comment it and tell about my blog to your friends

All Shortcut Keys for Windows XP........

All Shortcut Keys for Windows XP........
General keyboard shortcuts

• CTRL+C (Copy)
• CTRL+X (Cut)
• CTRL+V (Paste)
• CTRL+Z (Undo)
• DELETE (Delete)
• SHIFT+DELETE (Delete the selected item permanently without placing the item in the Recycle Bin)
• CTRL while dragging an item (Copy the selected item)
• CTRL+SHIFT while dragging an item (Create a shortcut to the selected item)
• F2 key (Rename the selected item)
• CTRL+RIGHT ARROW (Move the insertion point to the beginning of the next word)
• CTRL+LEFT ARROW (Move the insertion point to the beginning of the previous word)
• CTRL+DOWN ARROW (Move the insertion point to the beginning of the next paragraph)
• CTRL+UP ARROW (Move the insertion point to the beginning of the previous paragraph)
• CTRL+SHIFT with any of the arrow keys (Highlight a block of text)
• SHIFT with any of the arrow keys (Select more than one item in a window or on the desktop, or select text in a document)
• CTRL+A (Select all)
• F3 key (Search for a file or a folder)
• ALT+ENTER (View the properties for the selected item)
• ALT+F4 (Close the active item, or quit the active program)
• ALT+ENTER (Display the properties of the selected object)
• ALT+SPACEBAR (Open the shortcut menu for the active window)
• CTRL+F4 (Close the active document in programs that enable you to have multiple documents open simultaneously)
• ALT+TAB (Switch between the open items)
• ALT+ESC (Cycle through items in the order that they had been opened)
• F6 key (Cycle through the screen elements in a window or on the desktop)
• F4 key (Display the Address bar list in My Computer or Windows Explorer)
• SHIFT+F10 (Display the shortcut menu for the selected item)
• ALT+SPACEBAR (Display the System menu for the active window)
• CTRL+ESC (Display the Start menu)
• ALT+Underlined letter in a menu name (Display the corresponding menu)
• F10 key (Activate the menu bar in the active program)
• RIGHT ARROW (Open the next menu to the right, or open a submenu)
• LEFT ARROW (Open the next menu to the left, or close a submenu)
• F5 key (Update the active window)
• BACKSPACE (View the folder one level up in My Computer or Windows Explorer)
• ESC (Cancel the current task)
• SHIFT when you insert a CD-ROM into the CD-ROM drive
• CTRL+SHIFT+ESC (Open Task Manager) (Prevent the CD-ROM from automatically playing)

If you like this please comment it and send my blog to your friends

CREATE A FOLDER WITHOUT NAME

>click on folder
>press F2 or right click and rename
>Now Holding ALT key
>press 9 from numeric keypad eight times
>press Enter

or

another way...

>click on folder
>press F2 or right click and rename
>Now Holding ALT key
>press 0160 from numeric keypad
>press Enter

If you like comment it and tell about my blog to your friends

China Mobile Secret Codes

Default user code : 1122, 3344, 1234, 5678
Engineer mode : *#110*01#
Factory mode : *#987#
Enable COM port : *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings : *#987*99#
LCD contrast : *#369#
Software version : *#800#
Software version : *#900#
Set default language : *#0000# Send
Set English language : *#0044# Send
Set English language (new firmware) : *#001# Send
Default user code : 1122, 3344, 1234, 5678

IF you like this please comment it and tell about my blog to your friends